Alpha Silanes
Acetoxy Silanes
Alkoxy Silanes
Alkyl Silanes
Amino Silanes
Bis-Silanes
Chloro Silanes
Epoxy Silanes
Fluoro Silanes
Hydrogensilanes
Hydrogensiloxanes
Isocyanate Silanes
Mecapto Silanes
Methacrylate Silanes
Orthosilicate
Oximino Silanes
Phenyl Silanes
Special Silanes
Silazanes
Siliconates
Siloxanes
Sulfur Silanes
Thiocyanato Silanes
Ureido Silanes
Vinyl Silanes
Oligomeric Silanes



Silane | Silanes | Alkyl & Alkoxy Silanes | Surface Modifier | Hydrophobing Agents | Water Repellent

SiSiB® WR0412

iso-Butyltriethoxysilane.
Synonym: Triethoxy isobutyl silane

Countertype of Evonik Dynasylan IBTEO, Catylen D1200, DowCorning Z-6403
Chemical Structure

Introduction
SiSiB® WR0412 is high purity, undiluted iso-butyltriethoxysilane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.

SiSiB® WR0412 is a small molecule to allow for deep penetration into the construction materials (especially concrete and reinforced concrete) surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxyl groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.
Typical Physical Properties
Chemical Name: iso-Butyltriethoxysilane
CAS No.: 17980-47-1
EINECS No.: 402-810-3
Empirical Formula: C10H24O3Si
Molecular Weight: 220.38
Boiling Point: 190°C [760mmHg]
Flash Point: 63°C
 
Color and Appearance: Colorless clear liquid
Density [25°C]: 0.90
Refractive Index [25°C]: 1.3908
Purity: Min.98.0% by GC
Applications
SiSiB® WR0412 should be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane, such as SiSiB® CF1040 Fluid before use. Typical dilution levels are 40% and 20% SiSiB® WR0412 in a solvent.

Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface.
Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets. A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils, and other contaminants. The formulated SiSiB® WR0412 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.

SiSiB® WR0412 can be used as a surface modifier to generate hydrophobicity and to increase compatibility to organic non polar matrices.

SiSiB® WR0412 can be used as a component for the manufacture of Ziegler-Natta Catalysts.
Packings
Net weight 180Kg steel drum, for more details, please visit Packing Centre.
Technical Library
Download Technical Data Sheet Safety Data Sheet 中文


SiSiB® SILANES 2016 SiSiB® SILICONES 2016
SiSiB® SILANE Selection Guide SiSiB® SILANE Cross Reference Guide